Bluetooth - Mobile Phone; Receive A Call - Kenwood DPX-5200BT Mode D'emploi

Bluetooth®
Auto Pairing
When you connect iPhone/iPod touch to the USB input terminal, pairing
request (via Bluetooth) is automatically activated if [AUTO PAIRING] is set to
[ON]. (Page 19)
Press the volume knob to pair once you have confirmed the device name.
Bluetooth — Mobile phone

Receive a call

When there is an incoming call:
• [KEY 1] zone and [KEY 2] zone illuminate in green color and flash.
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected
time. (Page 17)
During a call:
• [LCD DISPLAY] zone illuminates according to the settings made for [COLOR
SELECT] (page 27) while [KEY 1] zone and [KEY 2] zone illuminate in green
color.
• If you turn off the unit, Bluetooth is disconnected.
16
ENGLISH
The following operations may differ or be unavailable depending on the
connected phone.
To
First incoming call...
Answer a call
Reject a call
End a call
While talking on the first incoming call...
Answer another incoming call and
hold the current call
Reject another incoming call
While having two active calls...
End current call and activate held
call
Swap between the current call and
held call
Adjust the phone volume*1
[00] to [35] (Default: [15])
Switch between hands-free and
private talk modes*2
*1 This adjustment will not affect the volume of the other sources.
*2 Operations may vary according to the connected Bluetooth device.
On the faceplate
Press or the volume knob or one
of the number buttons (1 to 6).
Press .
Press .
Press .
Press .
Press .
Press .
Turn the volume knob during a call.
Press 6 IW during a call.