Publicité
Les langues disponibles
Les langues disponibles
9
Superimpose two images.
Press the [Screen Fit] button.
The white pattern is for adjusting
the commander, and the green
pattern is for adjusting the
receiver.
The images from the
commander and the receiver are
automatically superimposed.
2
Correct the four corners individually.
When adjusting
each corner individually,
adjust so that the white
and green patterns
overlap to create one
pattern.
If you need to make fine
adjustments, see the next
section.
If you have finished making
adjustments, select No, and then
press the [
] button.
Use the [
] [
] [
] [
]
buttons to select the corner you
want to correct, and then press
the [
] button.
If you need to fine tune
the superimposed
images
Use the [
] [
] [
] [
]
buttons to correct the position of
the corners.
Correct each corner as necessary.
1
Adjust both projected
images manually.
If you need to make fine
adjustments, select Yes, and then
press the [
] button.
The manual adjustment screen is
displayed.
Press the [Esc] button to finish
making settings.
17
17
17
17
17
Publicité
