Epson PowerLite S17 Installation Rapide

PowerLite S17/X17/X21/W17
®
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online User's Guide.
Connect the projector
Choose from the following connections. See the sections below or the online
User's Guide for details.
Computer
S-Video Video L R
USB port
Connect the square end of a USB cable to the projector's USB-B (square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows XP or later: After turning on the projector, follow the on-screen
®
instructions to install the Epson
on first connection). If the software screen does not display automatically, open
My Computer or Computer, then double-click EPSON_PJ_UD.
Mac OS X 10.5.1 or higher: After turning on the projector, the setup folder
for USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Computer port
Connect one end of a VGA cable to the projector's Computer1 or Computer2
port, and the other end to your computer's
a laptop, switch it to external display (see "Troubleshooting"). You can also
connect an audio cable.
HDMI port
Connect one end of an HDMI cable to the projector's HDMI port and the other
end to an HDMI port on your computer.
Video device
Connect up to 5 video devices and press the Source Search button on the
projector or remote control to switch between them.
S-Video Video L R
Camera, USB device, or Epson DC-06 document camera
Connect a digital camera, USB flash drive, USB storage device, or Epson DC-06
document camera to the projector's USB-A (flat) port.
S-Video Video L R
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector's PC Free feature. See the online User's Guide for details.
*412540100*
*412540100*
USB cable
VGA cable
HDMI cable
Audio cable
USB Display software (EMP_UDSE.EXE; only
®
monitor port. If you are using
S-Video cable
RCA video cable
Audio cable
HDMI cable
Component video to VGA cable
Audio cable
USB cable
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector. The
on the projector turns blue.
3
Open the A/V Mute slide all the way.
4
Press the power button on the
projector or remote control. The
projector beeps, and the Status light
flashes blue and then stays on.
Note: To shut down the projector,
press the power button twice, then
unplug it. You don't have to wait for the
projector to cool down.
5
The default language of the menu system is English. To select another
language, press the Menu button on the projector or remote control.
Select Extended and press
your language and press
system.
Adjust the image
1
If you don't see an image, press the Source Search button on the
projector or remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see the
troubleshooting tips on the right.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
PowerLite X17/X21/W17: To enlarge or reduce the image, turn the
zoom ring.
PowerLite S17: To enlarge or reduce the image, press the Wide (enlarge)
or Tele (reduce) button on the projector.
PowerLite
X17/X21/W17
PowerLite S17
Wide Tele
power light
. Select Language and press
. Press the Menu button to exit the menu
. Select