Note Select Buttons; Adjusting The Pitch For Each Note; Adjusting The Volume For Each Note; Creating A User Temperament - Yamaha Harmony Director HD-200 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 50

Note Select Buttons

When either the INDIVIDUAL [VOLUME] or [PITCH] button is turned on, these buttons are used to select
the note for which the volume or pitch is to be adjusted.
When both the INDIVIDUAL [VOLUME] and [PITCH] buttons are turned off, these buttons are used to select
the root key of the selected temperament.

Adjusting the Pitch for Each Note

The pitch for each note (C–B) can be set in 0.1 cent increments.
Press the INDIVIDUAL [PITCH] button so that its lamp lights,
press the desired Note Select button, and then adjust the pitch by
using the DATA ENTRY dial or [+]/[-] buttons. The setting range
is -55 cent – +55 cent. Press the DATA ENTRY [+] and [-] buttons
simultaneously to return the cent value to "0."

Adjusting the Volume for Each Note

The volume for each note (C–B) can be set.
Press the INDIVIDUAL [VOLUME] button so that its lamp
lights, press the desired Note Select button, and then adjust the
volume by using the DATA ENTRY dial or [+]/[-] buttons. The
setting range is -15 – +5. Press the DATA ENTRY [+] and [-] but-
tons simultaneously to return the value to "0."

Creating a User Temperament

With this function, you can save your own original temperament settings (pitch and volume settings for each
note) to "User1"–"User5" as User Temperaments.
Press the [MEMORY] button so that its lamp lights. Select "User1"–"User5" by using the DATA ENTRY dial
or [+]/[-] buttons, then set the volume and pitch for each note by using the INDIVIDUAL [VOLUME] and
[PITCH] buttons. After making the settings, select another Memory number and make different temperament
settings if necessary.
Copying a Temperament
You can copy temperament settings to any of "User1"–"User5."
After selecting one of "User1"–"User5," hold the [EQUAL TEMPERED] button and press the [MEMORY]
button to copy the Equal Temperament settings to the currently selected Memory number. This operation also
applies to the PURE TEMPERED [MAJOR] and [MINOR] buttons.
C ( 0)
442.0Hz/ +8c
User1 C Major
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
C ( 0)
442.0Hz/ +8c
User1 C Major
0
0
0
0
0
0
0
0
Auto
0.0
0.0
0.0
Auto
0
0
0
0
10

Publicité

Table des Matières
loading

Table des Matières