Security-Center PROFILINE TV7330 Instructions D'installation page 38

9.1 Entering the camera name (camera ID)
Select CAMERA ID with the cursor and then press ENTER. You see the following display:
CAMERA ID
0 1 2 3 4 5 6 7 8 9 :
A B C D E F G H I J K
L M N O P Q R S T U V
W X Y Z a b c d e f g
h i j k l m n o p q r
s t u v w x y z
RET POSI
1. Now use the control keys to enter the camera ID. Select a letter with the control keys (the
letter then flashes) and then press ENTER. The selected letter is then shown in the name
bar.
2. After entering the camera ID in the name bar, select "POSI" to define the position of the
CAMERA ID in the video image of the camera. When "POSI" flashes, press ENTER to
confirm your selection. You now see the camera video image with the CAMERA ID. You can
change the position via the control keys. Confirm the position with ENTER.
3. The two arrows change the position of the cursor on the name bar.
4. After completing your input, select "RET" with the cursor and then press ENTER.
, .
9.2 Light control (LIGHT CNTL)
Move the cursor to select LIGHT CNTL. You can select different operating modes with the
LEFT/RIGHT keys. These are:
AES (Automatic Shutter Control): Shutter opening time: 1/50 to 1/100,000 sec. and AGC 0-
36dB. Recommended setting for the use of manual lenses.
AES LOW (Automatic Shutter Control): Shutter opening time: 1/100 to 1/100,000 sec. and AGC
0-36dB. Use this mode with manual lenses.
FLICKERLESS (flicker reduction): Shutter opening time: 1/120 (PAL), 1/100 (NTSC) and AGC 0-
36dB. Use this mode to compensate influences of fluorescent lighting at 100Hz. Not necessary
for Europe.
ME (Manual Shutter Control): Shutter opening time: 1/50 to 1/10,000. Use this mode for
making manual camera settings. This setting is for manual lenses.
AUTO-IRIS (fixed shutter time): Shutter opening time: 1/50. Select this setting if the camera is
operated with an auto iris lens. The electronic shutter time is fixed at 1/50 second (AGC 0-36dB).
AUTO IRIS + SHUTTER: Shutter opening time: 1/50 to 1/10,000 sec. and AGC 0-36dB
Recommended setting when using the camera with auto-iris lenses externally. You can set the
electronic shutter time manually. This setting is important if the object to be monitored moves
quickly.
38