Description Of Control Keys For The Program Menu - Security-Center PROFILINE TV7330 Instructions D'installation

8.2 Description of control keys for the program menu

(1) Up
Press this key to move the cursor one field higher.
(2) Down
Press this key to move the cursor one field lower.
(3) Right
Press this key to move the cursor one field to the right.
(4) Left
Press this key to move the cursor one field to the left.
(5) Enter
Press this key to open the program menu. If a menu
item has a submenu, press this key to open the submenu.
UP
LEFT
ENTER
DOWN
RIGHT
8.3 RS 232
The RS 232 connector can be used for programming the camera using a PC and the software
supplied (WIN95/98/2000/XP).
The PC software is not VdS tested. The RS 232 and I/O connections for the 230V AC model are
not VdS tested and must not be used in VdS systems. Permanent activation of the RS-232
connection is not permitted. It is for service purposes only.
PIN connections
RX PIN SD (D-Sub9) PIN3 from PC
TX PIN SD (D-Sub9) PIN2 from PC
NC
GND GND (D-Sub9) PIN5 from PC
35