De Dietrich DPI7766XP Guide D'utilisation page 30

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
2
USE
temperature of the bottom of the pan. In
the event that an empty pan is left on a
zone that is switched on, the sensor
automatically
adapts
delivered by the hob and limits the risk of
damaging the cookware or the hob.
Spillage protection
The hob may be switched off in the
following three cases:
- A spillage in the touchkey area (2.13.2).
- Damp cloth placed over the touchkeys.
- A metal object placed on the touchkeys
(2.13.3) .
Remove the object or clean and dry the
touchkeys and then continue cooking.
In these cases, the
displayed accompanied by an audible
signal.
«Auto-Stop» system
If you forget to switch off a pan, your
hotplate has an "Auto-Stop" safety
function that automatically switches off
the forgotten cooking zone after a preset
time (between 1 and 10 hours based on
the power level setting).
If the safety system is triggered, the
cooking zone is shown as cut off with
"AS" displayed on the control panel and
a beep sounds for about 2 minutes. To
stop it, simply press any of the control
buttons.
Sounds similar to the ticking of a
clock may be heard.
These sounds occur when the hob is in
operation and disappear or decrease
according to the heating configuration.
Low whistling or humming may also
occur depending on the model and on
the quality of your pan. These noises are
a normal part of induction technology
and do not indicate a fault.
the
power
symbol is
29
We do not recommend using any
hob protection mechanisms.

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières