M-Bus Communication - IME Nemo 96 HDLe Mode D'emploi

Nemo 96 HDLe
IF96013 module M-Bus communication
It makes available by M-Bus communication the main data concerning carried out
measurements as well as configuration parameters (
. In the models with built-in RS485 communication it allows to have an additional
protocol)
M-Bus communication output.
Standard: EN 1434-3
Transmission: asynchronous serial
Number of bit: 8
Stop bit: 1
PROGR MM BLE P R METERS
Password 3002
Communication protocol: Mbus / Mb2 / Mb3
Password 1000
N° primary address: 0...250
Transmission speed: 300 - 600 - 1.200 - 2.400 - 4.800 - 9.600 bit/s
Parity bit: none - even - odd
Waiting min. time before answer:
Modbus message word format:
Password 2222
N° secondary address: 0...99.999.999
28
For details, please see the communication
S 1000/320
1
3...99ms
Big Endian, Little Endian, Swap
MASTER
NETWORK
M-Bus communication programming
PASSWORD
1000
PRESS + TIME
MBUS
PRIMARY
ADDRESS
2
TRANSMISSION
SPEED
PARITY BIT
TIME
M-Bus
WORD
FORMAT
PASSWORD
2222
SECONDARY
ADDRESS
moves the cursor
Increases/decreases the loaded value
moves the cursor
Increases/decreases the loaded value
Big Endian Little Endian Swap
1.9
page 9
moves the cursor
Increases/decreases the loaded value
02/18 E08 10782668 WEB E cod.MF964..