Rs485 Communication - IME Nemo 96 HDLe Mode D'emploi

Nemo 96 HDLe
IF96001 module RS485 communication
It makes available by RS485 communication the main data concerning carried out
measurements as well as configuration parameters (
. In the models with built-in RS485 communication it allows to have an additional
protocol)
RS485 communication output.
Standard: RS485 - 3 wires
Transmission: asynchronous serial
Number of bit: 8
Stop bit: 1
Inquiry response time: 200ms
Max. number of network-connectable meters:
Max. distance from the master:
PROGR MM BLE P R METERS
N° address: 1...255
Transmission: 4.800 - 9.600 - 19.200 - 38.400 bit/s
Parity bit: none - even - odd
Waiting min. time before answer:
Modbus message word format:
S 1000/273
RS 485
Rx / Tx GND
+ –
3 4 5
22
For details, please see the communication
32 (up to 255 with RS485 repeaters)
1200m
3...99ms
Big Endian, Little Endian, Swap
USB
220Ω
A B GND
Tx /Rx Tx /Rx
+ -
RS485
Tx Rx
RS232
NETWORK
GND
Last network Nemo
220Ω
02/18 E08 10782668 WEB E cod.MF964..