Publicité
Les langues disponibles
Les langues disponibles
9
Clean the water inlet on the machine with a moist cloth.
Do not use an object with sharp edges to clean the water inlet.
10
Rinse the parts with fresh water after cleaning and put them back
into the machine.
11
Clean the water distribution disc with a moist cloth.
Be careful when you do this; make sure that the rubber sealing ring does
not get stuck under the edge of the water distribution disc. If it does, the
coffee machine starts leaking.
Note: Be careful not to damage the metal tab on the water distribution disc.
Flushing the coffee machine
If you have not used the coffee machine for three days, you have to flush it
with fresh water before you use it again.
Flush the machine in the following way:
1
Fill the water reservoir with cold water up to the MaX indication
and put it back onto the machine.
2
Put the 1-cup pod holder q or the 2-cup pod holder qq in the
machine without pod or pods.
3
Close the lid and lock the lid lever.
EnglisH
21
21
Publicité
