Publicité
Les langues disponibles
Les langues disponibles
12
Clean the coffee spout, the coffee collector, the pod holders, the
milk container and the milk container lid with hot water and some
washing-up liquid or in the dishwasher. Clean the water reservoir
thoroughly in hot water, if necessary with some washing-up liquid.
Now your Philips SENSEO
using the machine
Preparing for use
1
Fill the water reservoir with cold water up to the MaX indication
and put it back onto the machine.
The water reservoir has a volume of 8 medium-sized cups of coffee.
Never pour milk, coffee, hot water or carbonated water into the water
reservoir.
The MIN indication on the water reservoir indicates the minimum
amount of water required for brewing coffee. Always fill the water
reservoir beyond the MIN level.
2
Press the on/off button 3.
The light ring light flashes slowly while the water is heating up.
,
Heating up takes approx. 90 seconds.
The coffee machine is ready for use when the light ring around the
,
on/off button lights up continuously.
If the light ring around the on/off button flashes rapidly, the water
,
reservoir does not contain enough water for brewing coffee.
3
Move the lid lever upwards to release the lid.
4
Open the lid.
5
Place the appropriate pod holder in the machine.
Note: Make sure the pod holder is clean and the sieve in the centre is not
clogged, e.g. with loose coffee grounds.
-
Use 1 coffee pod in combination with the 1-cup pod holder and the
1-cup button q if you want to make one cup of SENSEO
coffee, cappuccino, latte macchiato or caffè latte.
coffee machine is ready for use.
®
EnglisH
11
11
black
®
Publicité
