Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before attempting to perform inspec-
tion or maintenance.
•
Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
The tool and its air vents have to be kept clean.
Regularly clean the tool's air vents or whenever the
vents start to become obstructed.
1
► 1. Exhaust vent 2. Inhalation vent
Replacing carbon brushes
1
► 1. Commutator 2. Insulating tip 3. Carbon brush
When the resin insulating tip inside the carbon brush
is exposed to contact the commutator, it will automati-
cally shut off the motor. When this occurs, both carbon
brushes should be replaced. Keep the carbon brushes
clean and free to slip in the holders. Both carbon
brushes should be replaced at the same time. Use only
identical carbon brushes.
Use a screwdriver to remove the brush holder caps.
Take out the worn carbon brushes, insert the new ones
and secure the brush holder caps.
► 1. Brush holder cap 2. Screwdriver
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
2
•
•
2
3
11 ENGLISH
1
2
CAUTION:
These accessories or attachments are recom-
mended for use with your Makita tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
Your tool is supplied with a guard for use with
any recommended grinding wheel, multi-disc,
flex wheel and wire wheel brush. If a diamond
wheel and/or cut-off wheel are also available
for use with the tool, they should only be used
with the appropriate optional guard for cut-off
wheels.
If you decide to use your Makita grinder with
approved accessories which you purchase from
your Makita distributor or factory service center,
be sure to obtain and use all necessary fasten-
ers and guards as recommended in this manual.
Your failure to do so could result in personal
injury to you and others.
Publicité
