Sony ICD-R100 Mode D'emploi page 25

To mark an index during recording
While recording a message, press INDEX at the point you want to
divide.
The new message number flashes three times at the
point you pressed INDEX. The message will be
divided in two messages; however, the messages will
be recorded without a break.
Message 1
1 Tip
You can add an index during recording pause (page 11).
To add an index during playback
While playing back a message, press INDEX at the point you want
to divide.
The message is divided in two and the new
message number flashes three times.
An index mark is added and the following
index numbers will increase by one.
1 Tip
You can add an index after you have paused playback with XPAUSE (page 16).
To play the message you marked with an index
Press . or > to display the message number as the divided messages
each have message numbers.
To play the divided messages continuously
Select "ON" for "CONT" as described in "Playing Back All Messages in a
File Continuously" on page 38.
Note
If 99 messages have been recorded in a file, you cannot add an index. In that
case, reduce the number of messages to 98 or less by erasing unnecessary
messages or by moving some of the messages to another file (see page 27) before
adding an index.
Message 2 Message 3
An index is added.
Recording continues
Continued
25
GB