INFOSEC UPS SYSTEM E4 LCD Evolution 5000 Manuel De L'utilisateur page 67

BATTERY
Battery type
Number
Standard model
Recharging time
Charging current (max.)
Batteries number & type
Long-run
model (S) Charging current (max.)
DISPLAY
LCD screen
ALARM
Battery mode
Low battery
Overload
Default
Bypass mode
PHYSICAL CHARACTERISTICS
Dimensions HxWxD (mm)
Standard model
Net Weight (kg)
Dimensions HxWxD (mm)
Long-run model
(S) Net Weight (kg)
ENVIRONMENT
Humidity
Noise level
MANAGEMENT / COMMUNICATION
RS232 & USB communications ports
Optional SNMP
Dry contacts
Software
NORMS
Standard
EMC
Low voltage (safety)
WARRANTY
Warranty
* Derate to 60% capacity in CVCF mode and to 90% when the output voltage is adjusted to 208VAC.
**If the UPS is installed or used in a place where the altitude is above 1,000m, the output power must be derated one percent per 100m.
***Product specifications are subject to change without further notice.
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 06 14 AA 59 203 45
12 V / 7 AH
20
7 hours recover at 90% capacity
Depending on the capacity of external batteries
UPS status, Load level, Battery level, Input/Output voltage,
Discharge timer and Fault conditions
Sounding every 4 seconds
Sounding every second
Sounding twice every second
Continuously sounding
Sounding every 10 seconds
576 X 250 X 592
81
576 X 250 X 592
25
0-95 % RH at 0- 40°C (non condensing)
<55dB to 1 meter
Supports Windows family, Novell, Linux, Mac and FreeBSD
Power management from SNMP manager and web browser
Dry contacts communication card for remote alarm
EN 62040-2 : 2006 ; EN 61000-2-2 : 2002; EN61000-4-2 : 2009;
EN61000-4-3:2006 +A1:2008 +A2:2010; EN61000-4-4:2004+A1:2010;
EN61000-4-5:2006; EN61000-4-8:2010
EN62040-1-1 : 2008
12 V / 9 AH
9 hours recover at
90% capacity
1.0 A
4.0 A
<58dB to 1 meter
InfoPower
CE
2 years
20
83
27
66