Dometic Waeco PerfectView M55LX Instructions De Montage Et De Service page 32

Installing the LCD monitor
7.3 Connecting the monitor electrically
The circuit diagram for the LCD monitor can be found in fig. d, page 8:
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
A
NOTICE!
Cables and connections that are not properly installed will cause malfunctions
or damage to components.
Correct installation of cables and connections ensures lasting and trouble-free
operation of the retrofitted components.
32
Description
Monitor
20-pin socket
Monitor line
20-pin plug
12 – 24 V positive cable (red): connected to the positive pole of the
ignition (connected positive, terminal 5) or the positive pole of the
battery (terminal 30).
Earth cable (black): connected to the negative pole of the voltage
source.
Cable (green): control input for video input CAM1,
such as for connecting the reversing light
Cable (white): control input for video input CAM2,
such as for the side camera
6-pin CAM1 socket (connection to video source 1)
6-pin CAM2 socket (connection to video source 2)
6-pin CAM3 socket (connection to video source 3)
with video signal detection
6-pin CAM4 socket (connection to video source 4),
with video signal detection)
Cable (blue): control input for video input CAM3
If the system is activated via this control line, none of the buttons
have a function (according to DIN EN 1501-1).
PerfectView M55LX, M75LX
EN