Intended Use; Technical Description - Dometic Waeco PerfectView M55LX Instructions De Montage Et De Service

Intended use

5 Intended use
The LCD monitors PerfectView M55LX (item no. 9102100059) and M75LX (item no.
9102100058) are monitors which are primarily intended for use in vehicles. They can be
used together with cameras (e.g. a reversing video system) or other video sources.
The LCD monitors are designed for use in all vehicles.
The LCD monitors are designed for commercial use.
6

Technical description

6.1 Function description
The LCD monitor can be connected to cameras (e.g. reversing video systems) or other
video sources (e.g. DVD players). It is possible to switch back and forth between video
sources.
The monitor features control cables which allow the cameras to be activated automati-
cally.
It can operate up to four cameras. Alongside the usual controls, the four cameras can be
switched consecutively in automatic mode. This monitor also features a distance indicator
in the display which is activated automatically when the reverse gear is engaged (CAM1).
The monitor display is protected from glare by the detachable sun visor.
6.2 Control elements
The following control elements are located on the monitor:
No. in
Descrip-
fig. 0,
tion
page 6
1
2
P
3 +
4 –
28
Description
Sensor window for the dimmer function.
The brightness of the display is automatically adapted to the
ambient light.
Switches the monitor on and off.
The button lights up red when the monitor is in standby. It
lights up green when the monitor is switched on.
1. Increases the brightness.
2. Increases the value of the selected parameter if a menu is
opened.
1. Reduces the brightness.
2. Reduces the value of the selected parameter if a menu is
opened.
PerfectView M55LX, M75LX
EN