elco AEROTOP SPLIT Mode D'emploi Pour L'utilisateur page 28

Scheduling
Heating or cooling schedule programming
- Days remaining
if there are any days which have not
yet been programmed, then repeat
the steps described above.
Turn the knob and select:
- Modify
to change any previously pro-
grammed periods
Turn the knob and select:
- Exit
to exit schedule programming.
Press the OK button to confi rm.
The display reverts to showing the
previous screen.
Press the back button " " to return to
the main screen.
To facilitate schedule programming
procedures, confi guration can be
carried out via:
- Wizard tme programming
- Preset programs
Turn the knob and select:
- Wizard time programming
Press the OK button.
Turn the knob and select the zone
in which you wish to apply schedule
programming.
Press the OK button.
Selecting days heating schedule programming
28 / GB
Turn the knob and select:
- Set time program
Press the OK button.
Now follow the step-by-step instruc-
tions which appear on the display from
time to time.
- Preset programs
Press the OK button.
Turn the knob and select the zone
in which you wish to apply schedule
programming.
Press the OK button.
Turn the knob and select:
- Set time program
Press the OK button.
Turn the knob and select among the
following:
- Family program
- No lunch program
- Midday program
- Always active
Press the OK button to confi rm.
Turn the knob to scroll through the
days and the heating program start
and end time.
Turn the knob and select save, then
press the OK button.
Press the back button "
the previous screen.
Selecting half-day program
- Time program/manual mode
(this mode can be used to select either
programmed or manual zone heating
management)
Press the OK button.
Turn the knob and select the zone to which
you wish to apply the setting. Select sched-
uled or manual programming.
Press the OK button.
Press the back button "
previous screen.
Simply turn the knob to adjust the temper-
ature.
" to return to
Setting comfort periods heating schedule programming
Selecting operating mode for zone 2
" to return to the