Publicité
1
6. Connect Wirelessly
EN
Press and hold the Wi-Fi (
Direct, Off, and Infrastructure Modes.
1. Wireless Direct Mode (LED=white)
Wireless Direct Mode allows your device to connect directly with your Label Printer. Select the "Brother
VC-500W ####" network in the Wi-Fi setup of your device (where #### is the last four digits of the
machine's serial number, located on its base). (NOTE: You will not have internet access in this mode.)
2. Infrastructure Mode (LED=blue)
Infrastructure Mode allows your Label Printer to print wirelessly through your Wi-Fi network. To start
this mode, see the Infrastructure Mode Configuration in the Manuals section of our website:
support.brother.com/manuals
15
) Button on your Label Printer for two seconds to switch between Wireless
2
Publicité
