Powering On; Stop; Adjusting The Power; Double Zone - THOMSON ICKT656FD Guide D'installation Et D'utilisation

2 2 / USING YOUR APPLIANCE
DESCRIPTION OF THE CONTROL
• •
PANEL
DESCRIPTION DES COMMAN DES
C
Start/stop touch control.
A
Power touch controls.
B
Timer touch controls.
C
• •

POWERING ON

Press the start/stop button for the cooking
zone you want to use. A flashing 0 and a beep
indicate that the cooking zone is on. You can
then choose the desired power level.
If you do not select a power level, the cooking
zone will automatically turn itself off.

STOP

• •
Press the start/stop button for the cooking
zone used or the power "
displayed.

ADJUSTING THE POWER

• •
Press the + or - power button to adjust the
power level from 1 to P (maximum power).
When it is switched on you can move directly
to maximum power "P" by pressing the "
ton.

DOUBLE ZONE

• •
To turn on the additional zone:
- Turn on the main zone.
- Press the "-" and "+" power controls for the
cooking zone simultaneously, a beep and an
"E" on the display confirms the instruction.
- Setting the power.
To turn off the additional zone:
- Press the "-" and "+" power controls for the
cooking zone simultaneously, you will hear a
beep and the "E E " on the display disappears
confirming the instruction.
A
- -
" button until 0 0 is
ADJUSTING THE TIMER
• •
B
There is a timer for each cooking zone.
Use the
on which you would like to use the timer.
If you press this button several times, a rotat-
ing symbol will show which cooking zone the
timer is being used for.
The timer may only be used for one cooking
zone at a time.
To use the timer:
- turn on the cooking zone
- select the rotating symbol for this cooking
zone.
The timer only operates if there is something
on the cooking zone.
- adjust the timing by pressing "
timer (or "- - " adjusting from 99,98,97,...min).
As soon as you release the button, the power
display will show the power of the cooking
zone or a
When you have finished cooking, the cooking
zone turns itself off, the timer shows 0 0 and a
b b i i p p sounds. Press any button to stop the bip.
- -
" but-
- To change the timer settings, press the - or +
buttons on the timer.
- To stop the timer, press the
- To use the timer on a different cooking zone,
choose a new use by pressing the
several times.
When the previous timing stops, set your tim-
ing for the new cooking zone using the "+" or
"-" buttons.
27
button to select the cooking zone
" .
"
t
EN
+
" on the
button.
button