Programming The Remote To Control Other Devices; Customizing The Power Button; Resyncing Your Cable/Satellite Box And Tv - Bose CineMate 15/10 Notice D'utilisation

Programming the remote to control other devices

Using the appropriate source button and device code, follow the same procedure
in "Programming your remote to control your TV" on page 22.

Customizing the power button

You can customize the
CineMate 15 system, TV and cable/satellite box simultaneously.
®
1.
Program your remote to control your TV and cable/satellite box (see
page 22).
2.
Press
Both buttons flash three times.

Resyncing your cable/satellite box and TV

After customizing the power button, your cable/satellite box and TV may become
out of sync and not power on/off simultaneously. Use the following steps to resync
your system.
1. Press the source button for the device that is out of sync.
2.
Press
3. Press .
Your devices power on/off simultaneously.
(power button) on your remote to power on/off your
and simultaneously and hold for ten seconds.
to power on/off the source.
Using the System
English - 23