Replacing The Remote Batteries; Cinemate ® 15 System Remote - Bose CineMate 15/10 Notice D'utilisation

Care and Maintenance

Replacing the remote batteries

CineMate 15 system remote
®
Replace both batteries when the remote control stops operating or its range seems
reduced. Use Alkaline batteries.
1.
Slide open the battery compartment cover on the back of the remote.
2. Remove both batteries.
Dispose of the batteries according to the regulations in your area.
3. Insert two AA (IEC-LR6) 1.5V batteries or the equivalent. Match the + and –
symbols on the batteries with the + and – markings inside the compartment.
4. Slide the battery compartment cover back into place.
CineMate 10 system remote
®
Replace the battery when the remote control stops operating or its range seems
reduced. Use a lithium battery.
1. Using a coin, turn the battery cover slightly left.
2. Remove the cover and insert the new battery (CR2032 or DL2032) flat side up,
with the plus (+) symbol in view.
3. Reseat the cover and turn it right to lock into place.
30 - English