Step 5: Choosing An Audio Cable - Bose CineMate 15/10 Notice D'utilisation

Setting up the System

Step 5: Choosing an audio cable

Your system may come with several audio cables. Use only one audio cable.
Note: You must connect the audio cable through your TV Audio OUT connector
panel.
1. On the back of your TV, locate the TV Audio OUT connector panel.
Remove
cap
Optical (digital audio)
Use this connection for
best audio performance.
2.
Choose the audio cable.
Note: If your TV does not have any audio outputs, use the audio outputs on
another device (such as a cable/satellite box). See "Alternate connections"
on page 16.
10 - English
Choose only one audio cable
Coaxial (digital audio)
Use this connection if no
optical output is available.
Analog (stereo audio)
Use this connection if no
optical or coaxial outputs
are available.