Extra Function - UNITEC Climate E0316 Manuel De L'utilisateur

Designation and functions of buttons on the display unit:
Button
1 [MODE]
2 []
3 []
4 []
5 [CH]
6 [C/F]
7 [SNOOZE/LIGHT]
8 Mains cable socket
9 Base
 Hanger
 Battery compartment
compartment
 Power supply unit
Designation and functions of buttons on the outdoor sensor:
 Display
 Hanger
 [TEST]
 [Channel selection
button]
 [C/F]
 Battery compartment
cover
 Base
1 2

English
313532__Funk-Wetterstation_Manual_180410.indd 10
Function
Switch between 12h and 24h
Time and alarm programming mode
upwards (hold down for fast forward)
Time and alarm programming mode
downwards (hold down for fast
backward)
Switch the alarm on and off; display
the alarm time
Switch over outdoor sensors
Display switchover for °C or °F
Snooze function for alarm
Manual signal transmission to the
weather station
Selection of channel on outdoor
sensor
Switch between °C and °F
3 4 5 6


Extra function

In standard mode, hold down for 3 seconds to
make the time and date settings
In standard mode, hold down for 3 seconds
to delete the minimum and maximum values
In standard mode, hold down for 3 seconds
to switch over atmospheric pressure units
(hPa/mb or inHg)
In standard mode, hold down for 3 seconds
to set an alarm time
In standard mode, hold down for 3 seconds
to activate sensor search
In standard mode, hold down for 3 seconds to
delete the minimum and maximum values
In battery mode (without 230 V power
supply unit) the background lighting is
switched on for 5 seconds

9





10
7

24.04.18 09:25

8