Lighting Technologies
«GRAND MASTER»
USING THE Grand Master SECTION.
The Grand Master section controls the output of the desk.
If the «ON/OFF» button is pressed then all output from the desk is off, and the LED
above the button is off.
A second press of the button restores the output, and illuminates the LED.
The Grand Master fader controls the overall output level of the desk.
In it's lowest position (0) the output is off, as if the «ON/OFF» button had been pressed.
In it's highest position (10) output is at maximum.
Any position beween these two will provide an output of between 0% and 100%
depending on the position of the fader.
Manual Section
Flash Keys
Each pair or MANUAL section faders has associated with it a «FLASH» button.
Each «FLASH» button will flash the output of it's associated channel, and the
corresponding LED will light.
The output from a«FLASH» button press is dependant only on the position of the Grand
Master fader, and whether the Grand Master section «ON/OFF» button is on.
BOLERO
Page
7
Revision : 003