Installation; Signal Connections; Technical Specifications; Options And Accessories - ADB BOLERO Manuel D'instruction

Lighting Technologies

Installation

The BOLERO is a professional lighting control desk, developed as per EN60950 safety
standard. It is a class 1 equipment designed and manufactured to EN60950.
To prevent any risk of electric shock do not open the desk, there are no user serviceable
parts inside. Refer servicing to trained service personnel exclusively.

Signal Connections

To enhance safety and operating reliability this product has been fitted with galvanic
isolation on the DMX512/1990 output. This isolation has been tested for 500 V dc in
order to prevent grounding loop problems or to transfer low voltages occasionally present
on some signals to controls or other signal connectors accessible to the user.
It is absolutely forbidden to apply any voltage to the connections of the BOLERO (AUX,
options and DMX). Connections to inappropriate sources may inadvertently damage
the BOLERO and may be dangerous to the user. It is the user's responsibility to use the
equipment for it's intended purpose and to check the equipement connected to it.
The BOLERO is a professional equipment developed with simplicity of use in mind.
However, in order to fully benefit from the designed in safety features, the equipment
shall be installed and serviced by skilled and trained personnel exclusively.

Technical Specifications

Power supply : 230 V +/- 10%, 50/60 Hz.
Mechanical dimensions (mm) (width x depth x height) :
Packed
Unpacked

Options and Accessories

• Dust cover for BOLERO 12
• Dust cover for BOLERO 24
• Flight case for BOLERO 12
• Flight case for BOLERO 24
GND 1 O
DATA - 2 O
DATA + 3 O
4 O
5 O
XLR5-MX
Cable : x 2 x 0.34 mm
Max. length : 250 m
BOLERO 12
530 x 340 x 130
500 x 315 x 118
BOLERO
O 1 GND
O 2 DATA -
O 3 DATA +
O 4
O 5
dimmer dependent
2 shielded
BOLERO 24
760 x 340 x 130
730 x 315 x 118
Page
Revision : 003
5