Error Codes - LaserLiner DistanceMaster Pocket Pro Mode D'emploi

Technical Data
Inside measurement range
Precision (typical)*
Laser class
Laser wavelength
Power supply
Dimensions (W x H x D)
Weight (incl. batteries)
Automatic switch-off
Storage temperature
Article number
* measuring distance up to 10 m with strongly reflective target surface
and at room temperature. The measurement deviation may increase by
± 0.2 mm/m for greater distances and under unfavourable measuring

Error codes:

Err101: Replace the battery
Err104: Calculation error
Err152: Temperature is too high: > 40°C
Err153: Temperature is too low: < 0°C
Err154:
Err155:
Err156: Received signal too strong
Err157:
Err160: The device is moving too much to measure.
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be
collected separately for disposal according to
the European Directive on waste electrical and
electronic equipment.
Further safety and supplementary notices at:
www.laserliner.com/info
DistanceMaster Pocket Pro
(Subject to technical changes without notice 01.15)
± 2 mm
2 < 1 mW
650 nm
2 x AAA 1.5 Volt batteries
48 x 112 x 24 mm
106 g
28 sec laser / 3 min device
-10°C – 40°C
-20°C – 70°C
080.948A
17
GB