Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Memory function:
or
Important notices
• The laser points to the location that will be measured.
No objects may get into the laser's line of measurement.
• The device compensates the measurement for different room
temperatures. Therefore allow the device a brief adaptation period
when changing locations with large temperature differences.
• The device is only conditionally useable in outdoor areas and cannot
be used in strong sunlight.
• The measurement results of outdoor measurements may be influenced
or falsified by rain, fog and snow.
• In unfavourable conditions, e.g. with poorly reflecting surfaces, the
maximum deviation may be greater than 3 mm.
• Carpeting, upholstery or curtains will not reflect the laser optimally.
Measure to flat surfaces.
• Measurements made through glass (window panes) can falsify
measurement results.
• An energy-saving function switches the device off automatically.
• Clean with a soft cloth. Water may not be allowed to penetrate
the housing.
Error codes:
Err101:
Replace the battery
Err104:
Calculation error
Err152:
Temperature is too high: > 40°C
Err153:
Temperature is too low: < 0°C
Err154:
Outside the measuring range
Err155:
Received signal too weak
Err156:
Received signal too strong
Err157:
Incorrect measurement or background is too bright
Err160:
The device is moving too much to measure.
16
GB
3 sec
View stored values
Publicité
Table des Matières
