Options - AEG FFB41600ZM Notice D'utilisation

During the drying phase, the
door opens automatically
and remains ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
AirDry is automatically activated with all
programmes excluding
applicable).

7. OPTIONS

Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you select non compatible
options, the appliance
automatically deactivates
one or more of them. Only
the indicators of the still
active options are on.
7.1 XtraDry
Activate this option to boost the drying
performance. With XtraDry on, the
duration of some programmes, water
consumption and the last rinse
temperature can be affected.
To improve the drying performance refer
to the XtraDry option or activate AirDry.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press Delay.
2. Press Delay to change the setting:
3. Press on/off to confirm the setting.
(if
XtraDry is a permanent option for all
programmes other than
need not to be selected at every cycle.
In the other programmes the setting of
XtraDry is permanent and it is
automatically used in next cycles. This
configuration can be changed at any
time.
How to activate XtraDry
Press Option until the indicator
comes on.
If the option is not applicable to the
programme, the related indicator does
not come on or it flashes quickly for a
few seconds and then goes off.
The display shows the updated
programme duration.
CAUTION!
If children have access to the
appliance, it is advised to
deactivate AirDry as opening
the door may pose a danger.
• The indicators
are off.
• The indicator
• The display shows the current
setting: = AirDry activated.
= AirDry deactivated.
Every time
activated, XtraDry is off and
needs to be chosen
manually.
ENGLISH 11
and
still flashes.
and
is