BiAL ILS Mode D'emploi page 12

5. Do not switch the heating element on if
it is not fully immersed in radiator heat-
ing medium.
6. Make sure an adequate air cushion is
present to protect against excessive pres-
sure build up in the heater (in dual-fuel
radiator always leave one of the valves
open).
7. Follow the subsequent guidelines when
connecting the electrical installation:
a. Brown wire — live connection to the
circuit (L).
b. Blue wire — connect to neutral (N)
8. Before filling the radiator with heating
medium, make sure that heating ele-
ment is fitted properly to guarantee
that it is water tight.
Notes prior to removal:
1. Before dismantling permanently discon-
nect the heating element from the mains
ensure that the radiator is not hot.
2. Be aware. A radiator filled with liquid can
be very heavy. When moving the radia-
tor, ensure that you take the necessary
safety precautions.
3. Before disassembly, close the appropriate
valves and drain the radiator to avoid any
damage being caused by water remain-
ing inside the radiator (close the appro-
priate valves, drain the radiator, etc.)
12
Product disposal
This product should not be disposed of
as general waste but should be brought
to the appropriate collection point for re-
cycling of electric and electronic devices.
This information is provided by the sign on
the product, user manual and packaging.
Information on the appropriate point for
used devices can be provided by Your local
distributor or manufacturer of the product.
Thank You for Your effort towards environ-
ment protection.
Maintenance
• Before performing maintenance, always
unplug the unit from the mains system.
• Periodically check the fluid level in the
radiator and ensure the heating ele-
ment is completely submerged.
• Clean the product with a dry or damp
cloth. If necessary, use a very small
amount of detergent, ensuring that it
contains no solvents or abrasives.