Device Specification - Henry Schein HS-LED 1500 Manuel D'utilisation

8
TROUBLESHOOTING :
CAUTION :
When failure or errors occur, please use the table below to try and fix the device. If the prob-
lem remains, please send back to the manufacturer or your local agent for prompt repair.
FAILURE
Red, green signal lights
of charge stand are unable
to light up
LCD device is unable
to light up
No activation

DEVICE SPECIFICATION :

reference: 900-6370 – nAMe: HS-LED 1500
curing HAndpiece
Red lamp
Red lamp life
Wave lenght
cHArger
Output voltage
Dimension
Weight
BATTerY
Li-ion battery pack
Voltage
Capacity
AdApTOr
Input
Output
Current
LigHT guide
Fiber optic with turbo tip : ø10mm taper to ø
Autoclavable
DESCRIPTIONS
CAUSE
Poor connection between
plug and cable
Defects in LCD device
or pc board
Lithium/ion
battery is defective
: 5 Watt
: up to 100,000 Hours
: 450 ~ 470 nm
: 8.4 V (Typical)
: 193(L)x83(W)x95(H)mm
: 177 g
: 1 pc
: 7.4 V (Typical)
: 1.350 mAh (Typical)
: AC100 V ~ 240 V 50/60 Hz
: DC 9 V
: 1.3 A (Typical)
: > 135ºC
SOLUTION
Check the connection
between plug and cable
Return to the
manofacturer
Dimension : 185(L)x38(W)x82(H)mm
Weight : 206 g
Intensity : > 1500 mW/cm
Dimension : 185 x 102.5 mm.
Weight : 78 g
for repair