Télécharger Imprimer la page

Edirol Audio Capture UA-20 Mode D'emploi page 14

Publicité

Names of things and what they do
9. ADVANCE (mode select) switch
This switches the operating mode.
On (Advanced mode)
The driver included with the UA-20 will be used to record/play/edit audio on
sequencer software or waveform editing software with high audio quality and
stable timing. Using the dedicated driver provided on the included CD-ROM, you
will be able to record, play, and edit audio on your sequencer or waveform editing
application with high quality and stable timing. Normally, you should use this.
Off (Standard Driver mode)
Select this mode when using applications that use the audio driver included with
your operating system, and utilize functionality specific to your operating system.
10. Input monitor switch
This selects whether or not the signal input to the input jacks will be output to the
headphone jack and the master output jacks.
ON
AUTO
OFF
11. Input select switch
Set this as appropriate for the device that is connected to the input jacks.
LINE
GUITAR
MIC
12. Input jacks
These are input jacks for analog audio signals. You can connect dynamic mics,
guitars, or audio devices. You must set the Input select switch to the position
appropriate for the device you have connected.
If you connect a guitar or mic only to the L jack or R jack, the signal will be
monaural.
14
The input signal from the Input jacks will be output to
the Headphone jack and the Master output jacks.
Settings or operations in an ASIO 2.0 compatible applica-
tion such as Cubase will be able to control the monitoring
setting.
The input signal from the Input jacks will not be output
to the Headphone jack or the Master output jacks.
When connecting an audio source or MIDI sound module
via an analog audio connection
When connecting a guitar
When connecting a dynamic mic
* The miniature mics (condenser mics) included with
some computers or sound cards are not supported.

Publicité

loading