Injector manifolds
without tubular fil-
ter
If the injector manifold has not been fitted with an A 800 tubular filter
or the manifold cannot accommodate a tubular filter, a borosilicate FP
20 filter plate can be inserted into the A 813 adapter.
To do this, unscrew the top part of the adapter.
Insert a filter plate into the bottom part.
Insert the silicone adapter for filter plates into the bottom part.
Screw the top part and bottom part back together.
Filter plates must be replaced approx. every 2 weeks or after 20
cycles have been run.
Do not insert a filter plate into the adapter if the injector manifold
has been fitted with an A 800 tubular filter.
en - Areas of application
35