Fitting The A 813 - Miele A 812 Mode D'emploi

en - Areas of application

Fitting the A 813

Injector manifolds
with tubular filter
34
The A 813 adapter is intended for use on injector manifolds with
screw connections.
Remove a nozzle from the injector manifold of your upper basket or

mobile unit.
Unscrew the top part of the A 813 adapter.

Screw the bottom part of the adapter in at this position.

Screw the top part into the bottom part.

Then screw the nozzles and A 815 silicone hoses into the rinse

ports. Alternatively, you can also connect different rinse fittings
from the Miele range of accessories to the adapter. Ports that are
not needed must be sealed with E 362 blind stoppers.
The wash water used for reprocessing narrow lumen instruments
such as transmission instruments needs to be filtered.
The injector manifold must be fitted with an A 800 tubular filter.

The tubular filter is supplied with its own operating instructions.
Follow the instructions on how to perform regular cleaning on the
tubular filter.