EHEIM streamonON+ 3500 Mode D'emploi page 20

English
‧ Do not operate any appliance if it has a damaged cord
or plug, or if it is malfunctioning or if it is dropped or
damaged in any manner.
POWER
SUPPLY
CORD
A "drip loop", shown in the figure, should be arranged
by the user for each cord connecting the aquarium
appliance to a receptacle.
The "drip loop" is that part of the cord below the level of
the receptacle, to prevent water travelling along the cord
and coming in contact with the receptacle. If the plug or
receptacle does get wet, DON'T unplug the cord; dis-
connect the fuse or circuit breaker that supplies power to
the appliance. Then unplug and examine for presence of
water in the receptacle.
‧ Close supervision is necessary when any appliance is
used by or near children.
‧ To avoid injury, do not contact moving parts.
‧ Always unplug an appliance from an outlet when not
in use, before putting or taking off parts, and before
cleaning. Never yank cord to pull plug from outlet. Grasp
the plug and pull to disconnect.
DRIP LOOP
20
‧ To avoid the possibility
of the appliance plug or
receptacle getting wet,
position aquarium stand
and tank to one side of a
wall mounted receptacle
to prevent water from drip-
ping onto the receptacle
or plug.