Technical Acceptance (Service Technician); Appliance Disposal - Bartscher ID091M01 Manuel D'installation, D'utilisation Et D'entretien

8.5.

Technical acceptance (service technician)

Before the first use, the device must be checked
in order to inspect proper functioning of every
component and detect possible defects
9.

APPLIANCE DISPOSAL

The appliance is marked in conformity
with the European Directive 2002/96/EG
WASTE ELECTRICAL AND ELECTRONIC
EQUIPMENT (WEEE).
By disposing the appliance in
accordance with the regulations the user
contributes towards prevention of adverse
effects on environment and health.
The symbol on the product or
attached manual indicates that the product cannot
be considered as ordinary household waste and
should be transferred to a special collection point
Bartscher GmbH
Franz-Kleine-Str. 28
33154 Salzkotten
Germany
It is recommended to run the following check-ups:
1. Check that the energy supply voltage is the
same as of the device voltage.
2. Turn on the automatic switch-off to check the
electrical connections.
3. Check that the protection devices work correctly.
for electrical
recycling.
Local waste management regulations should be
observed.
Further information on procedure, reusing and
recycling of the product is available in local
offices, waste management unit or with the
product sales agent.
phone: +49 (0) 5258 971-0
fax: +49 (0) 5258 971-120
15
ENGLISH
and electronic appliances for
GB