Makita DCL180 Manuel D'instruction page 10

1
► 1. Securing lip
Connect capsule. Align O symbol on capsule with O
symbol on handle and then firmly twist capsule in direc-
tion of arrow until it is secured.
► 1. O Mark
► 1. Handle 2. Capsule
NOTE:
• Always remove dust ahead of time, as suction
power will be reduced if there is too much dust
in cleaner.
• Always be sure to check that high performance
filter is loaded correctly prior to using cleaner. If
they are not loaded correctly, dust will get into
the motor housing, and cause motor failure.
If the following examples occur, high perfor-
mance filter is not loaded correctly. Reload them
correctly to rectify problem.
1
1
2
10 ENGLISH
Problem Examples
Securing lip of high performance filter is not firmly
locked into groove of cleaner housing.
1
► 1. Securing lip 2. Groove of cleaner housing
OPERATION
CAUTION:
• To connect attachments, such as nozzle,
twist-insert attachment in direction of arrow to
ensure secure connection during use. To dis-
connect attachment, twist-extract also in direc-
tion of arrow.
If attachment is twisted in the opposite direction,
when being connected or disconnected, capsule
may become loose.
► 1. Capsule
2
1