Scale Settings; Backlight; Zero Tracking Range; Filtering - OHAUS Ranger 1000 Série Manuel D'instruction

EN-10

5. SCALE SETTINGS

• In normal weighing mode, long press the Exit key to enter the User Menu
setting.
In Setup mode:
Press No to modify the parameters.
o
Press Yes to accept the displayed setting and proceed to the next
o
parameter
Press Back to return to last parameter setting without confirming
o
current modification
Press Exit to proceed to the next parameter without saving any
o
changes
5.1

Backlight

Sets the activation mode of the backlight.
The following settings are available: AU (Auto-on with items
greater than 9d placed on the pan or any key is pressed; turns
off after 5 seconds of inactivity), on, oFF.
Note
Press Yes to confirm the backlight setting and move to next
setting; or press Back to return to last setting.
5.2

Zero Tracking Range

Sets the range in which the zero reading is maintained.
The following settings are available: 0.5d, 1d, 2d, 4d (d =
scale division)
5.3

Filtering

Sets the level in which the Stable indication turns on; the higher
the setting, the faster the stabilization time.
The following settings are available: 0, 1, 2, 3 (levels)
RANGER 1000 SERIES