Yamaha XDA-QS5400RK Mode D'emploi page 14

Tab Menu Item
Trigger Out
Manual Control Hi / Lo
AirPlay Volume
Interlock
Audio Settings Equalizer Mode Bypass / Auto /
Equalizer
Manual : High
Equalizer
Manual : Mid
Equalizer
Manual : Low
Enhancer
Bass Extension Off / On
Monaural
Downmix
Speaker Type
Initial Volume
Mode
Initial Volume
Max Volume
Auto Play
Others Factory Factory Preset
Preset
Web AirPlay
Settings Password
Link
Backup /
Restore
14 En
Setting values Default
Power sync / Power sync
Manual
Hi
Off / Limited / Full Limited
Auto
Manual
-6.0 to +6.0dB 0.0dB
(0.5dB Steps)
-6.0 to +6.0dB 0.0dB
(0.5dB Steps)
-6.0 to +6.0dB 0.0dB
(0.5dB Steps)
Off / On On
Off
Off / On Off
Compact / Bookshelf
Bookshelf /
Floor standing /
In-ceiling / In-wall
Off / On Off
Mute / -80.0 to -40.0dB
0.0dB
(0.5dB Steps)
-60.0 to 0.0dB 0.0dB
(0.5dB Steps)
Off / On / Auto different for
every input
source
– –
– –
– –
Explanation
Specifies the condition for the TRIGGER OUT jack to
function.
"Power sync": functions in sync with the power status
(On/Off).
"Manual": manually switches the output level (High/Low)
for electronic signal transmission.
Sets the output level (High/Low) for the TRIGGER OUT
jack.
Sets whether or not the volume of the Zone and the
volume of iTunes or the iPhone are synchronized when
AirPlay input is selected.
Adjusts the volumes for the low-frequency, middle-
frequency, and high-frequency ranges of the audio.
When this is "Auto", they stay synchronized with the
volume and perform hearing correction for the auditory
response of the human ear.
Adjusts the volume of the high-frequency range of the
audio output.
Adjusts the volume of the middle-frequency range of the
audio output.
Adjusts the volume of the low-frequency range of the
audio output.
Enables/disables the Compressed Music Enhancer
feature.
Enables/disables enhanced bass sound, regardless of
the size of the speakers.
Enables/disables a mode that plays back stereo signals
downmixed to monaural audio.
Adjusts the effects of features such as Bass Extension
for optimal results depending on the speaker type.
"Compact": optimizes for small speakers.
"Bookshelf": optimizes for bookshelf speakers.
"Floor standing": optimizes for large speakers that are
placed on the floor.
"In-ceiling": optimizes for speakers embedded in the
ceiling.
"In-wall": optimizes for speakers embedded in walls.
Enables/disables setting of the initial volume when each
Zone is turned on.
Sets the initial volume for when each Zone is turned on.
Sets an upper limit for the volume levels to which each
Zone can be adjusted.
Sets whether or not audio is automatically played back
from servers, USB devices, etc. when each Zone is
turned on or the input source is switched.
"Off": always starts up with playback stopped.
"On": starts automatically to play back the last content
which you played back.
"Auto": starts automatically to play back the last content
only if it was being played back when the Zone was set
to standby mode.
Note
The setting value is different for every input source or
service.
Initializes to factory preset settings.
Sets the Zone's password for AirPlay.
Saves the Zone's current settings to a PC or restores
them from a backup on a PC.