Intended Use; Technical Description - Dometic MC 402 Mode D'emploi

Intended use

5 Intended use
The moniceiver (ref. no. 9600000350) is intended for installation and use in a vehicle
with an on-board 12 Vg power supply and must be installed in a double DIN slot.
The device combines the functions of a car radio, CD player, DVD player, playback
device for external audio and video sources and a hands-free system for mobile
phones.
!
WARNING! Danger of death or serious injury.
• When using the device, ensure your are not distracted when driving
(e.g. connect MP3 player and selected playlist/radio station before
starting the journey, programme in pre-set buttons for different radio
stations if necessary).
• Observe the current laws and regulations of the country in which the
device is being used.
• Reversing video systems are designed merely as an additional aid for
reversing, however this does not relieve you of the duty to take
proper care when reversing.
6

Technical description

The moniceiver is located in a housing which occupies two slots in the vehicle's
centre console.
The device can be connected to the handbrake switch. In this way, and for safety
reasons, no video can be played on the installed display while you are driving. The
display will only switch on if the vehicle is stationary and the handbrake is in use.
If a reversing video camera is connected to the moniceiver, then the device can be
set so that the camera automatically switches on when the reverse gear is engaged.
I
NOTE
You can find the full technical description in the detailed installation and
operating manual on the internet under www.dometic.com.
14
MC402
EN