DeLonghi DSM800 Série Mode D'emploi page 21

Operating Your Food Grinder
1) Pull the catch and remove the
low-speed outlet cover from the
stand mixer. Figure 3.
2) Hold the catch back and insert
the grinder. Turn it from side-to-
side until it locks into place.
3) Tighten the ring nut manually.
4) Fit the tray (7) and put the dish / cover (10) under
the grinder to catch the food.
5) Note: Thaw frozen food thoroughly before minc-
ing. Cut meat into 1-inch strips.
6) Switch the stand mixer to speed 4. Using the
stomper (8), gently push the food through, one
piece at a time. Do not push too hard, you could
damage the grinder.
Sausage Adapater Parts
A) Base Plate
B) Large Nozzle (for thick sausages)
C) Small Nozzle (for thin sausages)
Operating Your Sausage Adapter
1) Note: If you are using skin, soak it in cold water
for 30 minutes first.
2) Pull the catch and remove the low-speed outlet
cover.
3) Hold the catch back and insert the grinder body.
Turn it back and forth until it locks into place.
A
B
Figure 3
C