Connecting the units
Connecting the power cord
Microphone
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by
ignition switch (12 V DC).
Black (chassis ground)
Connect to a clean, paint-free metal location.
Orange/white
Connect to lighting switch terminal.
When connecting speakers without using the internal
amplifier, we recommend that this unit's internal amp is
turned off. For more details, refer to operation manual.
USB cable
Use supplied USB cable or separately
sold USB cable (CD-U150E).
iPod to USB connection cable
Use supplied iPod to USB connection
cable.
4 m (13 ft. 1 in.)
Fuse (10 A)
1.5 m (4 ft. 9 in.)
0.5 m (1 ft. 8 in.)
15 cm
(5-7/8 in.)
Microphone input
Fuse resister
Fuse resister