Presetting Channels Manually - Sony WEGA KP-FS53 Mode D'emploi

Presetting channels manually

1
After selecting "CH
PRESET", move
down to select "MANUAL
PROGRAM", then press
.
2
Select the program
number to which you
want to preset a channel.
(1) Make sure "PROG" is
selected, then press
(2) Move up or down until
the program number you
want to preset (e.g.,
program number "10")
appears on the menu,
then press
Tip
• You can also select the program number with the PROG +/– or number buttons.
3
Select the desired channel.
(1) Move up or down to
select either "VHF LOW",
"VHF HIGH", or "UHF",
then press
(2) Move up or down
until the desired
channel's broadcast
appears on the TV
screen, then press
4
If the sound of the
desired channel is
abnormal, select the
appropriate TV system.
(1) Move up or down to
select "TV SYS", then
press .
(2) Move up or down
until the sound
becomes normal, then
press .
up or
.
.
.
.
MANUAL PROGRAM
PROG : 09
TV SYS : B/G
SENS : HIGH
VHF LOW
FINE : AUTO
MANUAL PROGRAM
PROG : 09
TV SYS : B/G
SENS : HIGH
VHF LOW
FINE : AUTO
MANUAL PROGRAM
PROG : 10
TV SYS : B/G
SENS : HIGH
VHF LOW
FINE : AUTO
MANUAL PROGRAM
PROG : 10
TV SYS : B/G
SENS : HIGH
VHF LOW
FINE : AUTO
MANUAL PROGRAM
PROG : 10
TV SYS : B/G
SENS : HIGH
VHF LOW
FINE : AUTO
MANUAL PROGRAM
B/G
PROG : 10
TV SYS : I
TV SYS : B/G
SENS : HIGH D/K
VHF LOW M
FINE : AUTO
MANUAL PROGRAM
PROG : 10
TV SYS : I
SENS : HIGH
VHF LOW
FINE : AUTO
continued
Adjusting Your Setup (MENU)
45