Connecting Optional Components - Sony WEGA KP-FS53 Mode D'emploi

Connecting optional components

You can connect optional audio/video components, such as a VCR, a DTV (Digital
Television) Receiver, multi disc player, camcorder, video game, or stereo system. To
watch and operate the connected equipment, see pages 16 and 30.
Connecting a camcorder/video game equipment
using the t (video input) jacks
To open the drop-down panel of your
projection TV, push it up until you hear a
click, then it will slide down.
Video game
equipment
To S video
output
or
Camcorder
To video and
audio outputs
10
Using Your New Projection TV
S video cable (not supplied)
Audio/Video cable (not supplied)
Notes
• When connecting video game equipment, display the "PICTURE" menu
and select "ON" for "GAME MODE" to adjust the picture setting that is
suitable for video games (see page 37).
• You can also connect video equipment to the t 1, 2, or 3 (video input)
jacks at the rear of your projection TV.
• When both the (S video input) and t 4 (video input) are connected,
the (S video input) is automatically selected. To view the video input
to t 4 (video input), disconnect the S video cable.
To
(S video input)
L(MONO)
To t 4
(video input)
: Signal flow
4
R