Usb Messages; Sirius Radio Messages - Pioneer VSX-820 Mode D'emploi

Additional information

USB messages

Symptom Cause
iPod/USB Error 1 There is a problem with the signal path
(I/U ERR1) from the USB to the receiver.
iPod/USB Error 3 When there is no response from the USB. Switch off the receiver and reconnect
(I/U ERR3)
iPod/USB Error 4
The power requirements of the USB
(I/U ERR4) device are too high for this receiver.

SIRIUS radio messages

Symptom
Antenna
CHECK SIRIUS TUNER SIRIUS Connect tuner is not properly
LINKING
UPDT ***%
Updating
Invalid Channel
Cause
Antenna is not properly connected.
connected
The SIRIUS signal is too weak at the
current location. There is no SIRIUS signal
or the SiriusConnect Tuner is connected.
Unit is updating subscription.
Unit is updating channels.
Selected channel is not available/does not
exist.
Action
Switch off the receiver and reconnect
the USB to the receiver.
the USB to the receiver.
Switch off the receiver and reconnect
the USB to the receiver.
Action
Check that the antenna cable is
attached securely.
Check that the 8 pin mini DIN
cable and AC Adapter are
attached securely.
n/a
Wait until the encryption code
has been updated.
Wait until the encryption code
has been updated.
Select another channel.
11
73
En