The System Setup Menu; Using The System Setup Menu - Pioneer VSX-820 Mode D'emploi

06

The System Setup menu

Chapter 6:
The System Setup menu

Using the System Setup menu

The following section shows you how to make
detailed settings to specify how you're using
the receiver, and also explains how to fine-tune
individual speaker system settings to your
liking.
Important
• The OSD will not appear if you have
connected using the HDMI output to your
TV. Use component or composite
connections for system setup.
RECEIVER
SLEEP SOURCE
RECEIVER
INPUT SELECT
BD DVD TV
1 Switch on the receiver and your TV.
Use the  RECEIVER button to switch on.
Switch the TV input so that it connects to the
receiver in analog.
RECEIVER
2 Press
then press the SETUP button.
An on-screen display (OSD) appears on your
TV. Use /// and ENTER on the remote
control to navigate through the screens and
select menu items. Press RETURN to confirm
and exit the current menu.
Note
1 If headphones are connected to the receiver, disconnect them.
2 • You can't use the System Setup menu when the iPod/USB input is selected.
• Press SETUP at any time to exit the System Setup menu.
42
En
AUDIO
TUNER EDIT
PARAMETER TOOLS
TOP
MENU
TV
CONTROL
ENTER
INPUT
HOME
MENU
SETUP
iPod CTRL RETURN
CATEGORY
DTV/ TV
on the remote control,
2
3 Select the setting you want to adjust.
• Auto MCACC – This is a quick and
effective automatic surround setup (see
Automatically setting up for surround
sound (MCACC) on page 29).
• Manual SP Setup – Specify the size,
number, distance and overall balance of
MASTER the speakers you've connected (see
VOLUME
MENU
Manual speaker setup on page 43).
• Input Assign – Specify what you've
connected to the component video inputs
(see The Input Assign menu on page 46).
BAND
MUTE
• Pre Out Setting – Specify how to use the
PRE OUT outputs (see The Pre Out Setting
1
on page 47).
System Setup
1.Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Pre Out Setting
Return