Explanation Of Warning Symbols And Notes; Package Contents; Safety Notes - Hama 00177100 Mode D'emploi

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions
in a safe place for future reference. If you sell the
device, please pass these operating instructions on to
the new owner.

1. Explanation of Warning Symbols and Notes

Warning
This symbol is used to indicate safety instructions or
to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information
or important notes.

2. Package Contents

• USB 3.1 – SATA Adapter
• Plug-in power supply
• USB 3.1 connecting cable
• These operating instructions

3. Safety Notes

• The product is intended for private, non-commercial
use only.
• Use the product for its intended purpose only.
• Do not operate the product outside the power limits
given in the specifications.
• Protect the product from dirt, moisture and
overheating, and only use it in a dry environment.
• Do not use the product in moist environments and
avoid splashes.
• Do not bend or crush the cable.
• Always pull directly on the plug when disconnecting
the cable, never on the cable itself.
• Do not drop the product and do not expose it to any
major shocks.
• Keep this product, as all electrical products, out of the
reach of children!
2
• Dispose of packaging material immediately according
to locally applicable regulations.
• Do not modify the product in any way. Doing so voids
the warranty.
Warning
• Do not place the product near interference fields,
metal frames, computers, TVs, etc. Electronic
devices and window frames can negatively affect
the product's functionality.
• Do not continue to operate the device if it becomes
visibly damaged.
4. Connection and getting started
Warning
• The hard drive adapter may only be used with the
included plug-in power supply.
• Pay close attention to the power and voltage
information on the hard drive adapter if you decide
to use another power supply unit.
• The power supply unit's power data must
correspond to the specified parameters.
• Make sure that all cables are unplugged from the
hard drive adapter before connecting.
• Attach the hard drive adapter to the hard drive
• Place the hard drive on a level, stable and non-metal
surface
• Connect the power supply unit to the hard drive
adapter
• Then connect the power supply unit to an unused
socket
• Connect the included USB 3.1 cable to the hard
drive adapter and an unused USB port on your PC/
notebook.