Vetus SENSORD Manuel D'utilisation Et Instructions D'installation page 42

Example 1
If the drinking water tank is a Vetus 120
litres tank then the settings for tank vol-
ume and tank height will now have been
changed accordingly.
The settings for tank volume and tank
height can now not be changed.
The other settings, e.g. 20% tot. height
etc, do not apply here and can therefore
also not be changed.
Tank calibration
Tank type
Tank volume
Tank depth
20% tot. depth
40% tot. depth
60% tot. depth
80% tot. depth
Exit
• Return to the menu 'Tank settings' by
using the
to 'Exit' and pressing
• Return to the 'Configuration menu' by
using the
to 'Exit' and pressing
• Connect the next sensor; the name of
the sensor that has just been connect-
ed (Vetus) will be displayed after a brief
interval.
Configuration menu
Tank
Drinking water
Display settings
Exit
42
090430.01
Vetus 120 l
120.0 l
29.0 cm
n.a.
n.a.
n.a.
n.a.
/ keys to navigate
.
/ keys to navigate
.
Vetus
Select the sensor that has just been
connected using the
and press
the name of the tank will then be dis-
played again.
Repeat steps B and C for each following
sensor.
Ultrasonic tank management system
/ keys
2x. The keyboard and