Overview Of The Operating Functions; Key Sound - Vetus SENSORD Manuel D'utilisation Et Instructions D'installation

2.2 Overview of the operating
functions
There are 4 keys on the instrument.
These keys have the following functions:
Switch the background lighting on
or off.
press
menus.
Press the
lect the desired menu item and
press
menu.
press
tanks the volume is to be dis-
played. When the setting menus
have been opened this key can be
used to select a menu or change a
setting.
press
tanks are to be displayed simulta-
neously on the display.
When the setting menus have
been opened this key can be used
to select a menu or change a set-
ting.
The effect of the key is only noticeable
when the key is released. While setting in
one of the setting menus both key
and key have an automatic repeat
function.

2.2.1 Key sound

A sound is heard when one of the keys is
pressed.
This sound can be switched off in the
menu 'Display settings', option 'Sound'
paragraph 2.4.4.
28
090430.01
to go to the setting
/ key to se-
to open the selected
to select for which
to select how many
2.2.2 Suppression of acoustic alarm
An acoustic alarm can be suppressed
(MUTE) and then released by pressing the
key for 2 seconds.
2.2.3 Two display instruments
If 2 display instruments are connected
the settings controlling which tanks are
displayed can be set independently from
each other for both instruments.
The settings for contrast and background
lighting can also be set independently of
each other.
80
L
Tank 1
The settings for the tanks can be made on
either of the display instruments and then
also apply automatically for the other in-
strument.
Ultrasonic tank management system
21
L
Tank 1
2 sec.
80 1690
L L
Tank 1 Tank 2