Maxi-Cosi FamilyFix One i-Size Mode D'emploi page 21

FamilyFix One i-Size maintenance
instructions
1. Keep the FamilyFix One i-Size clean. Do not use
any lubricants or aggressive cleaning agents on
this product.
2. Press the test button to make sure that the batter-
ies have enough voltage (green LED indicator).
3. If the electronic component contains the right
battery type but is no longer functioning properly,
contact your retailer. The indicators only show
whether the product has been installed correctly.
If the battery circuit is interrupted after correct
installation, the product is
still safe.
4. Replace old batteries with new, high-quality ones.
Pay attention to the plus and minus poles when
installing the batteries.
Batteries
- Keep all batteries out of reach of children.
- Only use the recommended type AA / LR6
(1.5 volt) batteries. Do not use rechargeable
batteries.
- Never expose this product or the batteries to fire.
- Do not use old batteries or batteries that
show signs of leakage or cracks.
- Use only high-quality new batteries.
Environment
Keep all plastic packaging materials out of reach of
your child to avoid the risk of suffocation.
For environmental reasons, when you have stopped
using this product, we ask that you dispose of the
product in the proper waste facilities in accordance
with local legislation.
Questions
If you have any questions, contact your local
Maxi-Cosi retailer (see www.maxi-cosi.com for
contact information). Make sure that you have the
following information on hand:
- Serial number on the orange ECE sticker at the
bottom of the FamilyFix One i-Size base;
- Car make and model and seat on which the
FamilyFix One i-Size is used;
- Age, height and weight of your child.
EN
23