Controls And Indicators - Astralpool Smart 30 Manuel D'installation Et D'entretien

4.5.Controls and indicators

The AstralPool Chlore Smart Salt Electrolysis systems are fitted with a control panel on the front (Fig. 10).
4.6. Programming and control
Besides the basic operations, the AstralPool Chlore Smart Salt Electrolysis System has an input for an external control by means of an ORP
controller, residual chlorine, etc.; as well as one for the adjustment of the production of the equipment on activation of the automatic
swimming pool cover. Moreover, it permits the configuration of three electrode SELF-CLEANING modes: TEST, 2/2, 3/3 hours.
ELECTRODE SELF-CLEANING System: the leds [2] indicate electrode polarisation status (direct/reverse). The reversal frequency

can be selected by means of jumper "JP3" on the system control panel (Figs. 11- 12).
Fig. 10
1. SALINITY Alarm.
2. SELF-CLEANING indicators (DIRECT/REVERSE polarity)
"-"
3. Key (decrease production)
"+"
4. Key (increase production)
5. Production indicator 0 ... 100 %
7